Mold Inspection Report Template

Record the areas you inspected, moisture readings, visible growth, samples sent to the lab, findings and recommendations, add photos, sign it and download a PDF for your client. Free, no signup.

A mold inspection report records what the inspector saw, measured and sampled at a property on one day: the areas inspected, visible growth and its size, moisture readings and the likely source, samples sent to a lab, photos, findings, recommendations and the limits of the inspection. Fill in the template below and download the PDF, or print a blank copy.

Mold inspection report

Saved in this browser only. Photos stay on your device.

Your company

Property and scope

Conditions and instruments

Areas inspected

AreaObservationsGrowth (sq ft)Moisture readingIndoor RH and temp

Samples

Sample IDTypeLocationNotes

Findings and recommendations

Photos

Limitations and sign-off

Inspector signature

Inspecting for mold every week?

The inspection, the estimate and the clearance on one job

In Clevra your mold inspection is a checklist on the job, with number fields for readings, photo questions and a signature. Switch on Client report and your client gets a numbered PDF with your logo. The remediation estimate, the crew schedule and the invoice come from the same job.

See Clevra for mold inspection and remediation.

How to fill in the report

  1. 1

    Property and conditions

    Client, address, reason for the inspection, what is in scope, the weather and the instruments you used.

  2. 2

    Areas, readings and samples

    One line per area with what you saw, the size of any growth and the readings. Then each sample with its ID and location.

  3. 3

    Findings and signature

    Write the findings and recommendations in plain words, keep or edit the limitations, sign on screen and download the PDF.

Guide

What a mold inspection report includes

A client reads the report to decide what to do next. A remediation contractor reads it to price the work. An insurer or a lawyer may read it a year later. Each section below answers a question one of them will ask.

1. Property, client and scope

The address, the client and exactly what was inspected. Write down what was not inspected too, such as ducts that were not opened or a locked storage room. Most disputes start with "you missed this room".

2. Reason for the inspection

A musty smell, a leak, a home sale or a clearance check after remediation. The reason sets what the client expects from the report.

3. Conditions and instruments

The weather that day and the outdoor temperature and humidity, because both affect moisture readings and outdoor spore counts. List the meters you used and how you calibrated the sampling pump.

4. Areas inspected

One entry per room or area: what you saw, any staining, odor or visible growth, and the size of the growth in square feet. Size drives the remediation scope and the price.

5. Moisture readings and sources

Readings by material, next to a dry reference reading of the same material in an area that is not affected. Then the likely source: a leak, condensation, flooding, grading or a plumbing failure. Remediation without fixing the source does not last.

6. Samples and lab results

Each sample ID, type and location, the lab and its report number. The IDs must match your chain of custody form. For air samples, include an outdoor control taken the same day.

7. Photos

A wide shot of each area, then close-ups with the meter showing the reading. Caption every photo with the area name used in the report.

8. Findings

A short summary in plain words: where the mold is, how much, and what caused it. Put it near the top if your client will only read one paragraph.

9. Recommendations

What to do, in order. Fix the moisture source, remove or clean affected materials, dry to the reference reading, and verify before the walls are closed. Say if you recommend a remediation protocol written by a licensed assessor.

10. Limitations

A report describes conditions on one day, in the areas you could see and test. Hidden growth inside walls and changing conditions are the usual limits. The template fills in a starting text you can edit.

11. Inspector details and signature

Name, license or certification number where your state requires one, company and signature.

Example

Mold inspection report example

An excerpt from a filled-in report for a basement with a musty smell. The client, company and readings are made up.

SectionWhat the inspector wrote
ReasonMusty odor in the basement after heavy rain. Real estate transaction, requested by the buyer's agent.
ScopeBasement, main floor, attic and crawl space. HVAC ducts not opened. No wall cavities opened.
ConditionsOvercast, rain the day before. Outdoors 58°F, 71% RH.
Basement, north wallStaining and visible growth at the base of the drywall, about 6 sq ft. Drywall reading 38 on the meter's reference scale, dry reference 11. Indoor 64% RH, 66°F.
AtticNo staining or growth. Sheathing dry. 48% RH.
SamplesA1 basement air, A2 outdoor control air, T1 tape lift from the north wall drywall.
ResultsBasement air higher than the outdoor control, mostly Penicillium/Aspergillus-like spores. T1 shows active growth.
FindingsActive mold growth on about 6 sq ft of basement drywall, caused by water entering at the north foundation wall.
RecommendationsRedirect the downspout and fix the grading first. Remove affected drywall under containment, dry to the reference reading, then verify before rebuild.

Inspection, assessment and clearance reports

The names overlap, and some states define them in law. In general use they mean three different moments in a mold job.

ReportWhenWhat it answers
Mold inspection reportBefore any workIs there mold or a moisture problem, where, and how much? May include samples.
Mold assessment reportBefore workOften an inspection plus sampling and interpretation. In some states a licensed assessor also writes the remediation protocol.
Post-remediation verificationAfter remediation, before rebuildDid the work meet the protocol? Visual check, moisture readings and often clearance samples, with a pass or fail.

In Texas, for example, the company that writes the remediation protocol can't also do the remediation on the same project. Check your state's rules before you take both jobs.

Reference

Reading moisture and sample results

Moisture readings

Meter scales differ by material and mode, so a single number means little on its own. Compare each reading with a dry reference reading of the same material in an unaffected area, and record the scale you used. The EPA recommends drying water-damaged materials within 24 to 48 hours and keeping indoor relative humidity below 60%, ideally between 30% and 50%.

Size of the growth

The EPA says most people can clean up an area smaller than about 10 square feet themselves. New York City's mold guidelines group areas as small (under 10 sq ft), medium (10 to 100 sq ft) and large (over 100 sq ft), with more containment as the size goes up. Recording square footage per area makes the scope easy to price.

Air and surface samples

There are no federal limits for mold spores in indoor air. The EPA has not set any. Compare indoor samples with an outdoor control taken the same day, and look at which types are present, not only the total. Genera such as Stachybotrys and Chaetomium need very wet material to grow, so many inspectors treat them as a sign of long-term water damage.

When to sample

The EPA notes that if mold is visible, sampling is usually not needed. Samples help when you suspect hidden growth, for clearance after remediation, and when a sale or a claim needs lab results on paper. Send them to a lab accredited for environmental microbiology, such as one in the AIHA-LAP EMLAP program.

Mold inspection report FAQ

What should a mold inspection report include?

The property, client and scope, the reason for the inspection, weather and instruments, each area with observations, size of growth and moisture readings, the moisture source, samples and lab results, photos, findings, recommendations, limitations and the inspector's signature.

Is there a legal limit for mold spore counts?

Not at the federal level. The EPA has not set limits for mold or mold spores in indoor air. Inspectors compare indoor samples with an outdoor control from the same day and look at which types are present.

Do I need samples if I can see the mold?

Usually not. The EPA notes that sampling is usually unnecessary when growth is visible. Samples help with hidden growth, clearance after remediation, and sales or claims that need lab results.

Who can write a mold inspection report?

It depends on the state. Some states, including Texas, New York and Florida, license mold assessors and remediators. Check your state's rules and put your license or certification number on the report.

Can I use this template for post-remediation verification?

Yes. Pick Post-remediation verification as the reason, record the final readings and clearance samples, and state in the findings whether each area meets the criteria in the remediation protocol.

Where are my photos and data saved?

In this browser only. Photos are resized on your device and put into the PDF. Nothing is sent to Clevra.

Cta Dot Bg

All-in-one operations platform for trades.

You run a crew, not a tech company. Clevra handles the office stuff so you can stay on the tools.