Jobs, revenue, overdue invoices and timesheets, answered from your live data.
Fill in the job, what you found, the work done, parts and time on site, add photos, get the customer to sign on screen and download a PDF service report. Free, no signup.
A field service report is the record of one visit: the customer and site, when the technician arrived and left, what was reported, what they found, the work performed, parts used, photos, and signatures from the technician and the customer. Fill in the template below and download it as a PDF, or print a blank copy for the truck.
Saved in this browser only. Photos stay on your device.
Video walkthrough
From the work order to the signed PDF, on a phone, in one visit.
Writing service reports every day?
In Clevra your service report is a checklist attached to the job. The tech fills it in on site with photos and signatures, you send the customer a numbered PDF with your logo, and the invoice is made from the same job.
Customer, site, work order number, the date and the times you arrived and left. Your company details stay filled in for next time.
Write what was reported, what you found and what you did as three separate answers. Add each part on its own line, then photos.
Sign on screen, hand the phone to the customer to sign, download the PDF and email it before you leave the site.
Guide
A good service report answers the questions a customer, a manager or a warranty claim will ask weeks later: who was there, when, what was wrong, what was done, and who agreed. These are the sections that cover it.
Your company name, phone and email, the customer name and the site address. If the customer is a property manager or a GC, put the end site, not their office.
Use the same number as the work order, the estimate and the invoice. When the customer's accounts team asks what an invoice is for, that number is how you both find the report.
Arrival and departure times, and labor hours if more than one tech was there. Time on site is the first thing checked on a disputed bill or a service contract with response times.
Make, model, serial number and location of the unit you worked on. It is the only way to build a service history per unit, and most manufacturer warranty claims ask for the serial number.
What the customer said was wrong, in their words. Keep it separate from what you found, because they are often different.
The diagnosis, with readings as numbers and units. "Pressure low" can't be checked later. "Static pressure 38 psi" can.
What you did, in order, and the result. End with how you tested it, such as a temperature split, a pressure test or a breaker that held under load.
Each part on its own line with the quantity. This is what the office uses to build the invoice and restock the truck.
Is the job done, waiting on parts or needing a return visit? Then any recommendations, with how urgent they are. A recommendation the customer signed for is far easier to sell later than one you mentioned at the door.
Before and after, the model plate, the failed part and anything you could not fix. A photo with a tape or a meter in the frame is worth more than a paragraph.
The technician's signature and the customer's, with the date. If nobody was there to sign, write that down with the name of the person you spoke to.
Example
A filled-in sample from an HVAC repair call. The company and customer are made up. Use it to see how much detail each section needs.
| Section | What the tech wrote |
|---|---|
| Customer and site | Lakeside Dental, 1840 Harbor Ave, Suite 200 |
| Work order | WO-1187, repair |
| Time on site | Nov 12, 9:10 AM to 11:25 AM (2 h 15 min), one technician |
| Equipment | Packaged rooftop unit RTU-2, 5 ton, roof north side, serial on the plate photo |
| Problem reported | Suite 200 too warm since Monday. Thermostat set to 72°F, room at 79°F. |
| What we found | Condenser fan motor not running. Run capacitor read 2 µF against a 5 µF rating. Compressor short cycling on high head pressure. |
| Work performed | Replaced the 5 µF run capacitor. Fan motor amps within nameplate. Cleaned the condenser coil. Supply air 56°F, return 75°F after 20 minutes. |
| Parts | 1 x 5 µF 370 V run capacitor, 1 x coil cleaner |
| Status | Completed |
| Recommendations | Fan motor bearings are noisy. Replace the motor at the spring maintenance visit. |
| Photos | Capacitor reading, new capacitor fitted, coil before and after, model plate |
| Signed | Technician, and Dana R., office manager |
Tips
By the evening, arrival times get rounded and part numbers get guessed. A report filled in before you leave the driveway is shorter to write and easier to defend.
When a customer disputes a bill, they are usually disputing one of those three. Three separate answers make it clear which one.
Pressures, temperatures, voltages, amps and readings belong in the report as numbers with units, so the next tech can compare.
Take one wide shot that shows where you are, then the close-ups. Caption each one. In Clevra each photo also gets a stamp with who added it and when.
A signature on the day ends most arguments before they start. If you can't get one, say why in the report.
They describe the same job at different moments. Keep the same job number on all of them.
| Document | When | What it says | Who signs |
|---|---|---|---|
| Estimate | Before the work is approved | What the work will cost | The customer, to approve it |
| Work order | Before the visit | What to do, where and when | Usually nobody. The office assigns it |
| Field service report | On site, during or right after the visit | What was found and done, parts, time, photos | The technician and the customer |
| Invoice | After the work | What the customer owes | Nobody. The customer pays it |
Need the other documents too? Use the free estimate template and invoice generator.
The template above works for any trade. These are the extra fields trades usually add to the Work section.
| Trade | Fields to add |
|---|---|
| HVAC | Refrigerant type and amount added, suction and liquid pressures, superheat and subcooling, supply and return temperatures, filter size and condition |
| Plumbing | Fixture or line, static water pressure, water heater make and age, leak location, shutoff location, camera footage reference |
| Electrical | Panel and circuit, breaker size, voltage and current readings, GFCI and AFCI test results, issues found |
| Fire protection | System type, devices tested, pass or fail, deficiencies, tag number |
| Backflow testing | Use the backflow test report template with readings and pass or fail built in |
| Inspection and testing | Readings, sample IDs and a limitations note. See the mold inspection report template and the chain of custody form |
A field service report is the record of one service visit: the customer and site, when the technician was there, what was reported, what they found, the work performed, parts used, photos, and signatures from the technician and the customer. You send it to the customer and keep it for billing, warranty and the next visit.
Company and customer details, the work order number, the date and time on site, equipment details, the problem reported, what the technician found, the work performed, parts and materials, job status, recommendations, photos and signatures.
No. A work order is made before the visit and says what to do. The service report is made during or after the visit and says what was done. Put the work order number on the report so the two match.
Yes. The signature boxes work with a finger on a phone or tablet, and both signatures go straight into the PDF.
Yes. Add it under Your company and it prints at the top of the PDF. In Clevra, reports also get a cover photo, a number, numbered photos with a stamp of who added each one, and a revision history.
In this browser only. Your company details stay filled in for next time. Photos are resized on your device and put into the PDF. Nothing is sent to Clevra.
No signup on any of them. See all free tools.

You run a crew, not a tech company. Clevra handles the office stuff so you can stay on the tools.