Chain of Custody Form Template

A chain of custody form for field samples going to a lab: mold, asbestos, lead, water and soil. List each sample, request the analysis, sign it over and print the PDF that travels with the samples. Free, no signup.

A chain of custody (COC) form is the paper trail for a sample: who collected it, when and where, what the lab should test for, and every person who held it until the lab received it. Each handoff gets a name, a date and time, and a signature. Fill in the form below, print the PDF and put it in the cooler with the samples.

Chain of custody form

Saved in this browser only. Nothing is sent to us.

Project

Laboratory

Samples

Sample IDDateTimeTypeLocationAnalysis requestedVolume or area

Shipping and notes

First transfer and signature

Sampler's signature

The PDF prints blank custody lines below the first transfer. Each person signs by hand as the samples change hands.

Sampling on site every week?

Sample IDs, photos and the client report on one job

In Clevra your sampling checklist sits on the job: sample IDs, locations, photos and a signature, with required answers so nothing gets skipped. The client report, the return visit and the invoice come from the same job. Clevra doesn't send forms to labs, so print this form or the lab's own for the cooler.

How to fill in the form

  1. 1

    Project and lab

    Client, site, who took the samples, where results go, the lab and the turnaround you need.

  2. 2

    One line per sample

    Sample ID, date and time, type, location, the analysis you want and the air volume or area sampled.

  3. 3

    Sign it over

    Sign as the sampler, fill in the first transfer, print the PDF and seal it in a bag inside the cooler.

Guide

What a chain of custody form must include

A lab can reject samples, or a result can be challenged, when the form is missing a field. Check these before you seal the cooler.

Who and where

The client or project, the site address, the person who collected the samples, the company, and where to send results.

One line per sample

A unique sample ID that matches the label on the cassette, bag or bottle. The date and time it was taken, the sample type and the exact location, such as "basement, north wall, 2 ft above floor".

Analysis requested

What the lab should run for each sample. If you leave it blank, the lab calls you, and the sample waits.

Volume or area

Air samples need the volume in liters, which is the flow rate times the minutes run. Surface and dust wipe samples need the area sampled. Without it, the lab can't report a concentration.

Turnaround

Standard or rush. Rush usually costs more, so agree it with the lab first.

Every transfer

Each time the samples change hands: who gave them up, who received them, the date and the time, and both signatures. The chain ends when the lab signs as received.

Rules

How to keep the chain of custody intact

Fill in the custody section as it happens

Sign and write the time at the moment of each handoff, not later. A gap in the times is what a challenge looks for.

Courier and carrier transfers

When you ship, write the carrier and the tracking number in the transfer line. The lab signs as received when it opens the package and checks the samples against the form.

One form per shipment

Keep one form per cooler or package, inside a sealed plastic bag. If you use custody seals, note whether they were intact.

Correct mistakes the right way

Strike through with a single line, write the correct entry next to it, and add your initials and the date. Don't use correction fluid, and draw a line through unused rows.

Keep a copy

Photograph the signed form before you seal the cooler. If the original goes missing, the copy shows what you sent.

Check holding times and temperature

Some samples must reach the lab within hours, and many water methods require samples kept cold, at or below 6°C. Ask the lab before you sample, not after.

Sample types and what to record

Common field samples in building and environmental work, with the extra detail each one needs on the form.

Sample typeRecord on the formLab to look for
Mold, air spore trapCassette ID, flow rate, minutes run and total liters. Include an outdoor control.Accredited for environmental microbiology, such as AIHA-LAP EMLAP
Mold, tape lift or swabSurface and material, and the area sampledAccredited for environmental microbiology
Asbestos, bulk materialMaterial, layer and location, one ID per homogeneous areaNVLAP accredited for bulk asbestos analysis
Lead, dust wipeSurface, and the area wiped in square feetRecognized under the EPA's NLLAP program
WaterBottle type, preservative, temperature on arrivalCertified by your state for the test you need
SoilDepth and location, container typeAsk which accreditation the client or agency needs

Writing up the results? Use the free mold inspection report template.

Other uses

Chain of custody for evidence and drug tests

Chain of custody forms are also used for legal evidence and drug testing, with different rules. DOT drug tests use the federal Custody and Control Form, and police and court evidence uses the agency's own form. This template is for field samples you send to a lab, such as building, environmental and water samples.

Chain of custody form FAQ

What is a chain of custody form?

It is the record that follows a sample from collection to the lab: who collected it, when and where, what to test for, and every person who held it, with names, dates, times and signatures at each handoff.

What does "relinquished by" mean?

It is the person handing the samples over. The person taking them signs as "received by". Each transfer needs both signatures, the date and the time.

Will my lab accept this form?

Many labs accept any form that has the required fields, and some want their own. Ask your lab first. If they need their form, use this one as your field record and copy the details across.

Can one form cover several samples?

Yes. Use one line per sample and one form per shipment. Add more lines as you need them, and the PDF runs onto a second page.

What happens if the chain of custody is broken?

The lab may still run the samples, but the result is easier to challenge, for example in a real estate dispute or an insurance claim. Note what happened on the form rather than leaving a gap.

Can I use this form for drug tests or legal evidence?

No. DOT drug tests require the federal Custody and Control Form, and evidence for police or court uses the agency's own form. This template is for field samples sent to a lab.

Cta Dot Bg

All-in-one operations platform for trades.

You run a crew, not a tech company. Clevra handles the office stuff so you can stay on the tools.